2000 Yzn11 Transformer, High Voltage 6-11, Capacity 30-2500kVA

• Customization: Available
• Application: Power
• Phase: Three
• Model NO.: SBH25-M
• Core: Core-type Transformer
• Cooling Method: Oil-immersed Type Transformer
• Winding Type: Two-winding Transformer
• Certification: ISO9001-2000, ISO9001, CCC
• Usage: Power Transformer, Distribution Transformer
• Frequency Characteristics: Power Frequency
• Shape of Core: M
• Brand: Golden Triangle
• Rated Capacity: 30-2500kVA
• High Voltage: 6, 6.3, 6.6, 10, 10.5, 11
• Tap Range: +-2*2.5, +-5
• Low Voltage: 0.4
• Connected Group Label: Dyn11, Yzn11, Yyn0
• No-Load Loss: 25-670W
• Transport Package: Wooden Packed
• Specification: 3600*2200*2400 (mm)
• Trademark: Golden Triangle
• Origin: China
• HS Code: 8504210000
• Production Capacity: 12000 Pieces/Year
• Package Size: 2800.00cm * 2200.00cm * 2400.00cm
• Package Gross Weight: 800.000kg

Product Description

Product Description

The oil-immersed transformer is a new type of high-performance transformer with a more reasonable structure and better performance. It uses oil as the main insulation medium and relies on oil as the cooling medium, such as oil-cooled self-cooling, oil-cooled air-cooling, oil-cooled water-cooling, and forced oil circulation, etc. The main components of the transformer include the iron core, windings, oil tank, oil reservoir, respirator, explosion-proof tube (pressure release valve), heat sink, insulation bushing, tap changer, gas relay, thermometer, and oil purifier, etc.
Due to the long-term immersion of the silicon steel sheets in the transformer, oil can seep into the interlayers, and the transformer oil has elasticity to act as a buffer. Therefore, the oil-immersed transformer has low noise. However, the voltage regulating switch is inside the oil tank. When adjusting the voltage, the contact condition of the switch cannot be seen outside. If the contact is not good, it is equivalent to a break in that circuit. If the contact is poor, when the load is too large, the switch is prone to burn out.

Transformer normal service conditions

1.The height above the sea level is below 1000m;

2.Highest air temperature +40ºC;

3.Highest daily average air temperature+30ºC;

4.Highest annual average air temperature +20ºC;

5.Lowest outdoor air temperature -25ºC.
(defines in detail when transformer in special service conditions )

Type of cooling
 

(1) Oil-immersed transformers usually adopt three cooling methods: oil-immersed self-cooling, oil-immersed air-cooling, and forced oil circulation.
The oil-immersed self-cooling method relies on the natural convection of oil to dissipate heat.

 

(2). The oil-immersed air-cooling method is based on the oil-immersed self-cooling method, and additional fans are added to blow air into the oil tank and oil pipes to enhance the heat dissipation effect. Forced oil circulation uses an oil pump to extract the hot oil from the transformer, cool it outside the transformer, and then send it back into the transformer.

Structure Function
 

In the main substation of the urban rail transit power supply system, the main transformer usually adopts a three-phase oil-immersed transformer. The oil-immersed transformer mainly consists of the core, windings, oil tank, voltage regulating device, radiator, oil reservoir, gas relay, insulation bushing, explosion-proof tube, etc.

1. Core
The core is composed of silicon steel sheets stacked together with good magnetic conductivity. It forms a magnetic flux closed circuit, and the primary and secondary windings of the transformer are wound on the core.
The transformer core is divided into two structures: core type and shell type. Currently, the widely used transformers are of core type. The core of the core type transformer consists of the core column and the yoke. The core of the oil-immersed transformer has oil channels inside for cooling the core, which facilitates the circulation of transformer oil and also enhances the heat dissipation effect of the equipment.
2. Winding
The winding, also known as the coil, is the conductive circuit of the transformer. It is made by winding copper wire or aluminum wire into multiple layers of cylindrical shapes. The primary and secondary windings are concentrically arranged on the core column and are insulated from each other. The low-voltage winding is usually inside and the high-voltage winding is outside. The insulating material is wrapped around the wire to ensure insulation between the wires and between the wires and the ground.

3. Oil Tank
The oil tank is the outer shell of the oil-immersed transformer. Besides holding oil, it is also used to install other components. [2]
4. Voltage Regulator
The voltage regulator is set up to ensure the stability of the secondary voltage of the transformer. When the power supply voltage fluctuates, the voltage regulator is used to adjust the tap switch of the transformer to ensure the stability of the secondary output voltage. The voltage regulator is divided into on-load voltage regulator and off-load voltage regulator.

5. Radiator
The radiator is installed on the oil tank wall. The upper and lower parts are connected to the oil tank through pipes. When there is a temperature difference between the upper and lower oil temperatures of the transformer, the radiator forms oil convection, and the cooled oil flows back to the oil tank to reduce the temperature of the transformer oil. To improve the cooling effect, measures such as self-cooling, forced air cooling, and forced water cooling can be adopted.

6. Oil Sump
The oil sump is also called the oil tank. Transformer oil will undergo thermal expansion and contraction due to temperature changes, and the oil level will rise or fall accordingly. The function of the oil sump is to provide a buffer for the thermal expansion and contraction of the oil, keeping the oil tank always filled with oil; at the same time, due to the presence of the oil sump, the contact area between the oil and air is reduced, which can slow down the oxidation of the oil.
7. Gas Relay
The gas relay, also known as the gas protection relay, is the main protection device for internal faults of the transformer. It is installed in the middle of the connecting pipe between the oil tank and the oil sump. When a serious fault occurs inside the transformer, the gas relay connects the circuit breaker trip path; when a less serious fault occurs inside the transformer, the gas relay connects the fault signal circuit.
8. Insulation Bushing
The high and low insulation bushings are located on the top cover of the transformer oil tank. For oil-immersed transformers, porcelain insulation bushings are generally used. The insulation bushing's function is to maintain good insulation between the high and low voltage windings leads and the oil tank, and to fix the leads.
9. Explosion-proof Tube
The explosion-proof tube, also known as the safety air passage, is installed on the transformer's oil tank. Its outlet is sealed with a glass explosion-proof membrane. When a serious fault occurs inside the transformer and the gas relay fails, the gas inside the oil tank will break through the glass explosion-proof membrane from the safety air passage and prevent the transformer from exploding. 

Our Advantages

1.The insulation performance is excellent, which can reduce the insulation distance and lower the cost.

2.The transformer oil has a low viscosity and good heat transfer performance.

3.It can effectively protect the core and windings from the influence of moisture in the air.

4.It protects the insulating paper and insulating paperboard from the action of oxygen, reduces the aging of insulating materials, and extends the lifespan of the transformer.

5.Low maintenance cost and low noise level

Product Parameters

 

Discover the SBH25-M(30-2500)/10: a state-of-the-art 3-phase oil-immersed amorphous alloy iron core distribution transformer, crafted with precision for unparalleled energy efficiency and reliability.

Rated capacity(kVA)	High voltage(kV)	Tap range	Low voltage(kV)	connected group label	No-load loss(w)	Load loss (75ºC)(W)	No-load current(%)	Impedance voltage(%)	Sound power level(dB)	Exterior size(L*W*H) Install4-Φ18	Total weight(kg)
30	6 6.3 6.6 10 10.5 11	±2*2.5 ±5	0.4	Dyn11 Yyn0 Yzn11	25	510/480	1.5	4	52	850x600x825	320
50					35	735/700	1.2		53	965x600x845	465
63					40	880/840	1.1			1020x610x880	520
80					50	1060/1010	1.0		55	1070x620x870	565
100					60	1270/1215	0.9			1230x640x875	585
125					70	1530/1450	0.8		59	1230x750x830	715
160					80	1870/1780	0.6			1310x830x855	870
200					95	2210/2100	0.6		61	1300x1070x865	930
250					110	2590/2470	0.6			1470x940x920	1110
315					135	3100/2950	0.5		64	1600x1020x940	1250
400					160	3660/3480	0.5			1790x1120x975	1475
500					190	4380/4170	0.5		66	1770x1200x995	1755
630				Dyn11 Yyn0	250	5020	0.3	4.5		1890x1200x1050	2140
800					300	6075	0.3		68	1970x1270x1125	2470
1000					360	8340	0.3			2060x1250x1220	2880
1250					425	9720	0.2		72	2200x1270x1330	3585
1600					500	11745	0.2			2300x1250x1380	4255
2000					550	14000	0.2	5	73	2260x1400x1380	4770
2500					670	15450	0.2			2500x1490x1500	6095

 

IMPORTANT NOTICE!
We kindly request you provide the following information before placing your order, ensuring a seamless and tailored experience:
1. Specification of the prefabricated substation type;
2. Detailed transformer model and capacity requirements;
3. Comprehensive high and low voltage circuit main wiring scheme;
4. Types and specific parameters of any electrical components with special requirements;
5. Preferred shell color;
6. Details, quantities, and any other specifications for spare parts and accessories;

Two-year warranty
More than three certifications
15 years of accumulated experience 

Packaging & Shipping

Product Recommendation

Company Profile

ABOUT OUR PRESTIGIOUS COMPANY

Golden Triangle Power Technology Co., Ltd. (stock name: Golden Triangle, stock code: 837424) embarked on its journey in November 2009. Our company is a beacon in the realm of research, development, production, sales, and technical services for a wide array of power solutions. We specialize in advanced products like three-dimensional coil core transformers, amorphous alloy core transformers, amorphous three-dimensional coil core transformers, photovoltaic substations, energy storage equipment, and high and low voltage switchgear. Our repertoire also includes European, American, and Chinese outdoor box substations as well as intelligent substations. As a production-service oriented enterprise, we seamlessly integrate into construction EPC. Our cutting-edge products are extensively utilized across diverse sectors, including State Grid, Southern Power Grid, railways, mining, infrastructure, metallurgy, roads and bridges, as well as real estate management systems.
Our company stands out with its commitment to excellence, having secured the ISO9001:2015 quality management system certification, ISO14001:2015 environmental management system certification, and the ISO45001:2008 occupational health and safety management system certification. We pride ourselves on holding the PCCC energy-saving product certification and national mandatory product 'CCC' certification. Further solidifying our reputation, we also boast the CQC China quality certification and an esteemed AAA credit rating certification. Our accolades include being recognized as a national high-tech enterprise, a provincial 'specialized, special, and new' SME, one of the top 100 scientific and technological enterprises with immense growth potential in the province, a provincial SME in science and technology, and a municipal green factory. Our innovative prowess is backed by a provincial high-tech enterprise R&D center, an academician workstation, a doctor innovation workstation, 3 invention patents, and 51 utility model patents.
The recognition of our cutting-edge products is reflected in their inclusion in the 'Energy Saving and People Benefiting Project' promotion catalog, and the 'Recommended Catalog of Energy Saving Electromechanical Equipment' of the Ministry of Industry and Information Technology, Ministry of Finance, and the National Development and Reform Commission. We are proud to be the first power industry enterprise in Wenzhou to gain direct subsidies from the Ministry of Finance for product sales. Our products have garnered significant acclaim, being honored with titles such as national industrial energy-saving technical equipment products, the first set of products in key fields of provincial equipment manufacturing, and provincial excellent new industrial products. Our flagship products, the 'SCB13-RL solid triangle iron core dry-type transformer' and 'SBH16-RL solid triangle rolled iron core amorphous transformer,' are hailed under the 'Zhejiang manufacturing quality standard'. We have led the creation of 10 pivotal standards, including the 'GB/T32825-2016 National Standard for Three-phase Dry-type Three-dimensional Wound Core Distribution Transformer', 'NB/T 10483-2020 Standard for Three-phase Dry-type Amorphous Alloy Three-dimensional Wound Core Distribution Transformer', and 'T/CEElA 251-2016 Standard for Composite Transformers for Photovoltaic Power Generation', contributing substantially to energy conservation and the advancement of green energy technology in China's power industry.
OUR COMPANY'S HONORS AND ACHIEVEMENTS

Amidst fierce market competition and rapid technological evolution, Golden Triangle remains steadfast in its philosophy: "Quality is the lifeblood of an enterprise." With the full implementation of the ISO9001:2000 international quality management system, we commit to "quality excellence, perfect service, product quality, continuous quality improvement" as our unwavering quality policy to ensure absolute customer satisfaction. Our company ranks among the National Development and Reform Commission's "Energy Saving and Huimin Engineering Energy-efficient Distribution Transformer" initiatives.

The exhibition we attended

Display area

VISUAL JOURNEY: COMPANY AND PRODUCT SHOWCASE

 

FAQ

1. Q: Are you manufacturer?

A: Yes, we are manufacturer. Our factory is in Wenzhou China

1. Q: Can I get guarantee of products?

A: Yes, every product is 1 year quality warrantee under customer correct using the products.

1. Q: Do you have any Certificate?

A: Yes. Each of our unit has CCC, ISO9001 certificate. All the electric parts with CE certificate, If you need any other Certificate, we can help you to get it.

1. Q: How to buy it? What about the delivery?

A: Please contact me by email or online, let me know your situation, I will give you professional solution. We have shipping agent can choosing the cheapest and fastest delivery. FOB, CIF, C&F or EXW are no problem for us.

1. Q: What's the payment terms?

A: For small testing orders, we can accept Waster union, T/T and Credit card.
For mass orders, we accept t/t and L/C.

1. Q: What about the production?

A: Produce time is 4~6weeks.

1. Q: Could you offer some spare parts?

A: Yes, no problem.

1. Q: What about the maintenance?

A: All the goods past the test, maintenance is very easy.

The company adheres to the quality policy of "quality first, honestservice, strict management, and striving for perfection", and gives back tothe majority of users with first-class technology, first-class quality, and first-class service. We warmly welcome people from all walks of life to visit us forguidance and negotiation, to seek common development, to jointly build a'win-win" and to create a better future with you !